TAEWON SIBATA CO., LTD.
Product Categories | Health at work,Media |
Country | Korea, South |
Address | (08588) #404 67, Gasan digital 2-ro, Geumcheon-gu, Seoul, Korea |
Tel | +82-2-841-2270 |
Website | http://www.sibata.co.kr |
COMPANY INTRODUCTION
From the SIBATA SCIENTIFIC TECNOLOGY, Mask Fitting Tester, Digital Dust Indicator, and Environmental measurement equipment etc has been the importation, manufacture, supply, and maintenance from the SIBATA. Recently they has been supplied to the Ministry of Environment, Institute of Health and Environment, Agencies of University, Conglomerates Research Institutions and Medical Center.
Our Products
Mask Fitting Tester
When selecting a worker's initial mask, check the suitability of wearing it through Fit Test, and it is suitable for training and education on the correct wearing method. Also, it helps to improve worker's safety by quickly checking the fit between the worker's mask and face before entering the hazard site.
MoreReal Time Mask Fitting Tester
It is possible to check the leakage rate between the mask worn by the worker and the face, and it is possible to check in real time the possibility of harmful substances remaining and the positive pressure maintaining inside the mask by simultaneously inspecting the leakage and the pressure.
MoreLow Volume Pump
- Sampling pump for various sampling such as measurement of particulate matter in work environment and atmospheric environment. (Small, Lightweight)
- Flow Rate Range : 5.0~30.0L/min (Constant Flow Rate)
- 5 sampling conditions can be stored. - Display : Organic EL Type
- Equipped with various timer functions (down timer, volume timer etc)
Digital Dust Indicator
- Small and lightweight Digital dust Indicator designed to measure personal exposure of workers.
- Light scattering type automatic measuring device (0.001~100.0㎎/㎥)
- Convenient to wear and store as the control and measurement parts are separated.
- Before measurement, sensor sensitivity can be corrected through BG measurement and SPAN measurement.
Sorbent Tubes (Charcoal Tubes)
This product consists of a glass tube filled with cleaned activated carbon collected in two layers, and sealed.
Moreover, thanks to a two-layer system, it is possible to judge the breakthrough amount at the time of measurement.
It is suitable for work environment measurement methods such as NIOSH and OSHA in the United States.
Personal Mini Pump
- Compact and lightweight design considering personal exposure collection of organic solvents.
- Personal MiniPump provides constant
flow rate and is suited to be used with sorbent tubes. (10 ~ 300 mL/min)
- Measurement Mode : Manual, countdown timer, volume timer, interval timer
Digital Dust Indicator
- Light scattering type fine dust Indicator. (0.001~10.000mg/m3)
- Built-in Double Diaphragm Pump for stable constant flow suction.
- Before measurement, sensor sensitivity can be corrected through BG measurement and SPAN measurement.